View Cart (0)
888.541.3840

Try 5 Samples for just $10
Free Shipping On All Orders
<<< Previous Beautiful Tile Return to Category (MARBLE & ONYX MOSAIC SAMPLES) Next Gorgeous Tile >>>

SAMPLE-ASIAN STATUARY HERRINGBONE 1X3 SAMPLE

sample-ASIAN STATUARY HERRINGBONE 1X3 1/4 SHEET SAMPLE_MAINsample-ASIAN STATUARY HERRINGBONE 1X3 1/4 SHEET SAMPLE_MAIN
Move your mouse over image or click to enlarge

More Views

  • sample-ASIAN STATUARY HERRINGBONE 1X3 1/4 SHEET SAMPLE_MAIN
  • sample-ASIAN STATUARY HERRINGBONE 1X3 1/4 SHEET SAMPLE_3
  • sample-ASIAN STATUARY HERRINGBONE 1X3 1/4 SHEET SAMPLE_4
Out of Stock
Call Us Now to Order This Item.
Our Price: $2.99

Always Free Priority Shipping
(Usually Ships in 24 to 48 Hours)
Close

When you buy 4 or more samples from GlassTileStore.com, we will include a $20 Gift Card with your order!

  • Can be used towards all products or samples on GlassTileStore.com
  • Can be combined with any other coupons
  • Free priority shipping on both your samples and your gift card
  • Gift card is good toward your next purchase and will be shipped together with your samples

sample-ASIAN STATUARY HERRINGBONE 1X3 1/4 SHEET SAMPLE

SAMPLE

You are purchasing a 1/4 sheet sample measuring approximately 3 " x 12 " with FREE shipping via USPS.

INSTANT UPGRADE to priority shipping when 2 or more samples are purchased.

Samples are intended for color comparison purposes, not installation purposes.

-Glass Tiles -
This tile does not need to be grouted

Our designers have carefully chosen the suggested grout color as the perfect complement to this tile.

    For Glass Tiles
  • You would need to use Non-Sanded Grout.
  • Grout joints should be packed full and free of voids and pits
  • Clean excess grout as the work progresses before it has hardens completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Highly recommended to purchase the Glass Installation/Maintenance Kit - http://www.glasstilestore.com/collection/tiling-supplies/glass-tile-maintenance-package.html
    For Glass + Stone or Just Stone
  • We strongly recommend using the Grout Release show here, as it will make removal of excess grout significantly easier.
  • It is recommended to first use the Grout Release, then grout the tile, then use a sealant to the tile such as our Fila MP90.
  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardens completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Non-Sanded grout must be used on all glass, stone, and metal tiles, or you will scratch the tile.
  • Highly recommended to purchase the Glass & Stone Installation/Maintenance Kit - http://www.glasstilestore.com/collection/tiling-supplies/glass-stone-tile-maintenance-package.html
Substrate:
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

Installation:
To avoid affecting the color of glass tile, White modified thin-set is recommended for all installations. A second option is regular tile wall glue.
Grout joint should be a minimum of 1/16” and not butt set.
Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface.

Grouting:
Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer.

Cutting:
Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.
Disclaimer:
Due to the transparent nature of most of our tile please consider choices carefully. Tiles are handmade so variations in color and texture are to be expected. All tiles should be inspected before installation, as no adjustment will be made after installation.

Maintainance:
Abrasive cleaners should not be used. Use a glass cleaner such as Windex and a lint free soft cloth.

Customers Who Viewed This Also Viewed

Check items to add to the cart or select all

  1.   Asian Statuary Herringbone 1x3 Marble Tile
    Asian Statuary Herringbone 1x3 Marble Tile

    List Price: $24.00

    Our Price: $15.99

    You Save: $8.01 (33%)

  2. Sample-Crema Marfil Herringbone Tiles Sample
  3. Sample-Asian Statuary Hexagon Tile Sample
  4. Sample- Sushi Glass Tile Sample

  Loading...