|
To use for glass and stone or stone tile maintenance, package includes 1 bottle of Grout Release, 1 bottle of MP 90 and 2 bottles of Filavia Bango.
|
FILAPRW200
Grout Release
How It's Used:
No dilution: ready to use
Application:
- Before application, remove any dust from the surface for treatment.
- Apply FILAPRW200 evenly with an airless spray pump, taking care not to leave pools on the surface.
- It can also be applied with a brush or a soft applicator.
- Apply to the edges of installed material with special care.
- 24 hours after application of FILAPRW200 the floor can be grouted, taking care to remove excess grout filler thoroughly with a sponge before it is completely dry.
|
Filavia Bagno
Concentrated Bathroom Spray Cleaner
How It's Used:
Ready for use: do not dilute.
Application:
- Spray onto surfaces, holding the bottle certical about 15cm fro surface to be cleaned.
- Leave to act then clean with an absorbent cloth.
Fila MP/90
Stain Protection For Natural Stone and Polished Porcelain Stoneware
How It's Used:
Ready for use: do not dilute.
Application:
- For protecting porcelain tiles and polished natural stoneware: Use a flat brush to spread an even coat of Fila MP/90 onto a clean and dry surface.
- After 24 hours, when it is dry remove the excess using a single-disc professonal cleaner (white or beige disc) or a household polisher fitted with felt pads.
- Stubborn residues can be removed with a cloth dipped in FilaSolv.
|
